Submersible pump for waste water

Performance curve at 2900 rpm
Applications
Evacuation, transfer and emptying of waste water.
Materials
Pump body in AISI 304.
Pump shaft in AISI 420.
Impeller in technopolymer.
Suction and discharge in cast iron.
Double mechanical seal in aluminiumgraphite.
O-rings in NBR/EPDM.
Equipment
Float switch and 10m of cable with plug type F.
External capacitor with capacitor box included.
Motor
Asynchronous 2 poles.
IP68 protection.
Continuous operation.
Class F insulation.
Built-in thermal protection.
Limitations
Maximum water temperature: 40°C.
Maximum solids passage: Ø 7mm.
Maximum submersion: 7m.